Jeep Gladiator JT
TRIM: SPORT, OVERLAND, RUBICON, MOVJAVE
EVO SPEC KING 2.5 inch KING COILOVERS
KING 2.5 inch Coilover Long Arm Front - KING 2.5 inch Coilover Enforcer Rear Suspension System
The front EVO King Coilover System is engineered for the guys who like to go fast. This system utilizes a coilover similar to our EVO SPEC Front Bolt on Coilover system and has the same added benefits, as well as an additional bypass shock. With the addition of a bypass shock you have full external adjustability of the damping and “zones” within the shock stroke that allow the system to be position sensitive. This system gives your suspension up to 14" of vertical wheel travel specifically tuned for the Jeep JT.
Coilover/Bypass shocks (Comes complete with EVO SPEC King Shocks)
Adjustable ride height without the need for changing parts
All shocks purchased with our kit come with EVO Spec Proprietary Spring Rates and Valving.
The EVO MFG JT Gladiator Pro King Shocks Coilover Suspension System is a high-performance front and rear coilover suspension system specifically prepared for a balance of on and off road comfort and wheel travel when you want to go fast.
All bracketry is precision laser cut from 3/16” steel and CNC press brake formed for optimum precision and installer fitment.
EVO MFG JT Gladiator Long Arm King Coilover Pro Suspension System comes with replacement heavy duty control arms and front/rear trackbars that offer adjustability and strength over the factory parts.
The proprietary shock package built by King Shocks Technologies is specifically tailored, tuned and tested for the Jeep Gladiator JT, giving the vehicle a comfortable feel on the road, making this suspension kit compatible for a daily driver and weekend wheeler.
Offroad, the EVO MFG King Coilover Pro Suspension System provides the ability to wheel comfortably on advanced terrain while keeping the controlled and performance-oriented ride EVO MFG is known for.
The EVO MFG King Coilover Pro Kit offers adjustable ride height without the need for changing, adding or removing any parts, allowing for a varying lift height of roughly 3 inches to 5 inches. Accessory HD spring kits available for increased lift heights or heavily outfitted rigs. No exhaust or driveshaft modification needed.
The engineers at EVO MFG made sure to create something that could be assembled by someone with knowledge of standard tools, making it possible to complete installation by an experienced, mechanically inclined individual at home or a professional shop in a few days.
EVO MFG Proprietary Coilovers are the prime shock/spring setup when looking for all around comfort with additional off road performance.
The Enforcer Long Arm Pro Suspension system includes, specific versions of front and rear coilovers, brake lines, bumpstops, trackbar bracket front and rear trackbars, all adjustable control arms and all required hardware along with the addition of custom shock mounting/reinforcement brackets.
When purchasing any EVO MFG product there is peace of mind knowing the quality, strength and capability will be able to tackle the trail of your dreams while still being able to drive the Jeep home comfortably.
Front King Coilover Mounting Brackets
Rear Bolt on Coilover Mounting Brackets (Pair)
Front and Rear EVO Spec. 2.5” Remote Reservoir Coilovers Built by King Shock Technologies (Pair)
Front Shock Mounting Axle Brackets (Pair)
Front and Rear Sway Bar Endlinks (Pair)
Front Upper and Lower Adjustable EVO Long Arms (Pair)
Rear Upper and Lower Adjustable Enforcer Control Arms (Pair)
Front and Rear Adjustable HD Trackbar
Rear Trackbar Relocation Bracket
JT Rear Axle Swap Kit
< 3.75” backspacing wheels
Front Aftermarket Driveshaft required to achieve non limited 14.5" of front travel
This kit is Mojave compatible
All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship.
All products must be on the original vehicle it was installed on by the original purchaser and is not transferable
Proof of purchase is required for all warranty claims
EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product
EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs
All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.
All return/warranty products must be recieved in new, unused, unmodified, undamaged condition to qualify for credit.
Exceptions to stated warranty:
Wearable items are not included in warranty. These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware
Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.
EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.
EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.
All product finishes provided are warranted to be free from defects at time of sale only.
Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.
EVO Manufacturing products that are used for competition and or racing immediately void all warranties.
EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.
EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.
Electronic components and products provided by EVO MFG will have a 90 Day Warranty and must be deemed free if any tampering or accidental damages or abuse.
EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.
Warranties: EVO Mfg. disclaims any other warranties, whether express or implied, beyond those set out in the above-entitled “Warranties” provision. Warranties specifically disclaimed include but are not limited to any implied warranties, any warranty of suitability, any warranty of merchantability, or any warranty of fitness for a particular purpose.
Consequential Damages: EVO Mfg. will not be responsible for damages resulting in negligence, alteration, accident or use for which the part was not approved by the manufacturer or EVO. EVO will not be responsible for loss time, inconvenience, loss of use of a vehicle or any other consequential damages, or labor for removal from the vehicle and reinstallation (if any) or any part or merchandise.
We ship our parts anywhere in the world. Due to varying shipping rates, taxes and duties we require all orders to be placed through email (email@example.com) or phone calls (310.761.9588) to better assist you, the customer, in receiving the most accurate and cheapest shipping rates.
Please allow one business day for order processing. The majority of orders are shipped immediately if your item is in stock and available. You will receive an email notification within 2 business days, notifying you that your item(s) has shipped. If your item is currently not in stock, it will have to be made to order which may take up to 8 weeks. In such instances you will be contacted via email by Customer Service.
Please note because we are located in Southern California all orders shipping to locations within Southern California usually arrive the next business day via Fedex or UPS Ground.
For orders shipping outside the US, please email firstname.lastname@example.org for shipping options.
Damaged or Missing Items:
Damaged or Missing Items:
Please verify that all contents shown on the bill of materials located on the instructions are free from damage or defects.
EVO MFG will not be held resposible for missing or damaged items caused by shipping or packaging.
EVO MFG must be notified if you have missing or damaged items within 7 days after delivery date. Contact 310.761.9588
All raw products should be checked for defects and for proper fitment prioir to powdercoating or painting. Incorrect items or defects must be brought to the attention of EVO MFG prior to powdercoating or painting.
EVO MFG is not responsible for cost associated with powdercoating or painting of parts that were not previously verified.
For all orders shipped within California, there will be an 8.00% sales tax automatically calculated and added to your order total at time of checkout. Orders shipping to all other states will be exempt from sales tax.
Cancelling or Changing Orders
Orders can not be cancelled once you have completed the checkout process. However, we will do our best to accommodate you if you need to make any changes. Please contact Customer Service as soon as possible.