FRONT DOUBLE THROWDOWN, COILOVER/BYPASS (BLACK) Aftermarket Axle FOR JT/JL
EVO-3092B-S60 EVO MFG JEEP WRANGLER JL/GLADIATOR FRONT DOUBLE THROWDOWN
The EVO MFG JL/JT Front Double Throwdown Kit is the top tier “do it all” suspension system offered when it comes to suspension travel, quality and absolute race proven performance.
Key Features:
The EVO MFG Front Double Throwdown produces the most wheel travel achievable out of the JL Wrangler and JT Gladiator coilover and bypass’s coming in at 13.5” of wheel travel from full droop to full tuck. At the same time, also maintaining a low center of gravity with an adjustable lift height of 3-5 inches without replacing any components. Class leading wheel travel isn’t the only thing EVO MFG has engineered into this system to make it the best system on the market. High quality, correct geometry, custom coilovers, bypass shocks and all necessary hardware and bracketry for an all-inclusive “one and done” package make this the most well rounded high-performance suspension package on the market.
Design / Performance:
All bracketry precision laser cut from 3/16” steel and CNC press brake formed for optimum precision and installer fitment.
The proprietary shock package built by King Shock Technologies are specifically tailored, tuned and tested for the Jeep Gladiator, giving the vehicle a sports car feel on the road, making this suspension kit compatible for a daily driver and weekend wheeler. Once taken offroad, the EVO MFG Front Double Throwdown Suspension provides an unrivaled ability to wheel at low speeds while crawling to high speed desert trails keeping the controlled and performance-oriented ride EVO MFG is known for.
This is EVO MFG’s most advanced kit on the market. The most capable, race proven kit in its class.
.EVO MFG Double Throwdown kits lift height is adjustable, roughly 3-5"s (Gas Engine)
Heavier Springs (sold separately) maybe required to achieve your desired lift height.
Final Thoughts:
The incorporation of vented backing plates allow for better airflow and (along with the aluminum backing plate) can be painted to create a custom look, adding to the already clean fit and finish of the EVO MFG Front Double Throwdown.
The engineers at EVO MFG made sure to create something that could be assembled and built by someone with knowledge of standard tools, welding and their uses, making it possible to complete at home during the weekend.
Coilovers are the prime shock/spring setup when looking for on and offroad performance, EVO MFG’s Front Double Throwdown takes it a step further by adding bypass shocks for the ultimate ability to tune the ride to any specific need. EVO MFG doesn’t stop there, the seamless addition of AirBump bumpstops control harsh bottoming when putting the Jeep’s to use on the trail.
The race proven performance suspension system includes, Front Double Throwdown specific versions of brake lines, bumpstops, trackbar bracket and all required hardware along with the addition of custom shock brackets.
When purchasing any EVO MFG product there is peace of mind knowing the quality, strength and capability will be able to tackle the trail of your dreams while still being able to drive the Jeep home.
Recommended:
< 4” backspacing wheels
Drag Link Flip Kit
Optional:
EVO-3099 / V Inner Fender Liners
Required: (sold separately)
Front Long Arm (EVO-3010)
Front adjustable trackbar (EVO-3047B)
Front aftermarket driveshaft
Welding and cutting
Diesel equipped JL/Gladiators will require EVO-3106B (sold separately)
2.0L - 2.0L E-Torque - 3.6L - 392 - Diesel
Not recommended for Jeeps equipped with 3.6L E-Torque
Installation on 392 should be performed by a skilled installer. It will require installer to adapt/move some engine compartment items. This will be installer fitted/fabricated.
Image may differ from actual product
All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship.
All products must be on the original vehicle it was installed on by the original purchaser and is not transferable
Proof of purchase is required for all warranty claims
EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product
EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs
All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.
All return/warranty products must be recieved in new, unused, unmodified, undamaged condition to qualify for credit.
Exceptions to stated warranty:
Wearable items are not included in warranty. These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware
Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.
EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.
EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.
All product finishes provided are warranted to be free from defects at time of sale only.
Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.
EVO Manufacturing products that are used for competition and or racing immediately void all warranties.
EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.
EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.
Electronic components and products provided by EVO MFG will have a 90 Day Warranty and must be deemed free if any tampering or accidental damages or abuse.
EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.
Disclaimers:
Warranties: EVO Mfg. disclaims any other warranties, whether express or implied, beyond those set out in the above-entitled “Warranties” provision. Warranties specifically disclaimed include but are not limited to any implied warranties, any warranty of suitability, any warranty of merchantability, or any warranty of fitness for a particular purpose.
Consequential Damages: EVO Mfg. will not be responsible for damages resulting in negligence, alteration, accident or use for which the part was not approved by the manufacturer or EVO. EVO will not be responsible for loss time, inconvenience, loss of use of a vehicle or any other consequential damages, or labor for removal from the vehicle and reinstallation (if any) or any part or merchandise.
Shipping:
We ship our parts anywhere in the world. Due to varying shipping rates, taxes and duties we require all orders to be placed through email (sales@evomfg.com) or phone calls (310.761.9588) to better assist you, the customer, in receiving the most accurate and cheapest shipping rates.
Please allow one business day for order processing. The majority of orders are shipped immediately if your item is in stock and available. You will receive an email notification within 2 business days, notifying you that your item(s) has shipped. If your item is currently not in stock, it will have to be made to order which may take up to 8 weeks. In such instances you will be contacted via email by Customer Service.
Please note because we are located in Southern California all orders shipping to locations within Southern California usually arrive the next business day via Fedex or UPS Ground.
For orders shipping outside the US, please email sales@evomfg.com for shipping options.
Damaged or Missing Items:
Please verify that all contents shown on the bill of materials located on the instructions are free from damage or defects.
EVO MFG will not be held resposible for missing or damaged items caused by shipping or packaging.
EVO MFG must be notified if you have missing or damaged items within 7 days after delivery date. Contact 310.761.9588
FITMENT VERIFICATION:
All raw products should be checked for defects and for proper fitment prioir to powdercoating or painting. Incorrect items or defects must be brought to the attention of EVO MFG prior to powdercoating or painting.
EVO MFG is not responsible for cost associated with powdercoating or painting of parts that were not previously verified.
Sales Tax
For all orders shipped within California, there will be an 8.00% sales tax automatically calculated and added to your order total at time of checkout. Orders shipping to all other states will be exempt from sales tax.
Cancelling or Changing Orders
Orders can not be cancelled once you have completed the checkout process. However, we will do our best to accommodate you if you need to make any changes. Please contact Customer Service as soon as possible.
