PROTEK REAR AXLE TRUSS JK/JKU
$169.28
EVO MFG D44 M210 ADVANTEC Truss and C2 End Forging Axle Kit for JL/JT
Off-road abuse can put immense stress on your Jeep's front axle, leading to bent axle housings, damaged C-forgings, and expensive repairs. The EVO MFG D44 M210 ADVANTEC Truss and C2 End Forging Axle Kit is your ultimate insurance policy, designed to reinforce and protect the most vulnerable parts of your front axle.
This comprehensive kit provides a massive increase in strength, allowing you to push your Jeep to its limits without fear of failure.
Key Features & Benefits
-
Complete Axle Reinforcement: This kit is an all-in-one solution that strengthens both the main axle housing and the C-forgings, which are notorious weak points on the JL/JT Dana 44 M210 front axle.
-
ProTek Front Axle Truss: The included truss is a one-piece, end-to-end system made from blend of 3/16" and 1/4-inch laser-cut and CNC-formed steel. It spans the entire axle, from left to right, to prevent deflection and reinforce the brittle FAD/CAD casting (Front Axle Disconnect).
-
C2 End Forging Gussets: The C2 gussets are made from 3/16-inch laser-cut steel and are designed to "backbone" the upper and lower C-forgings. This prevents them from bending or breaking, keeping your alignment in check under heavy loads from large tires and hard landings.
-
Precision Engineering: Manufactured with CNC press brake forming, this kit minimizes excess heat and welding, which reduces the chance of warping the axle during installation. This makes for an easier, more accurate, and stronger final product.
-
Direct Fit Design: The kit is a direct fit for the Dana 44 M210 front axle on both the Jeep Wrangler JL and Gladiator JT Rubicon models. The C2 gussets are also compatible with the Dana 30 M186 axle found on Sahara/Sport models.
-
Includes Everything You Need: The kit comes complete with the axle truss, C2 gussets, and wiring retainers for a clean and professional installation.
Important Installation Note
-
Welding Required: This is a weld-on kit that requires welding and fabrication skills for proper installation. Welding should only be performed by a competent and experienced welder.
Recommended Labor Hours: 3-5
Read More
All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship.
All products must be on the original vehicle it was installed on by the original purchaser and is not transferable
Proof of purchase is required for all warranty claims
EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product
EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs
All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.
All return/warranty products must be recieved in new, unused, unmodified, undamaged condition to qualify for credit.
Exceptions to stated warranty:
Wearable items are not included in warranty. These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware
Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.
EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.
EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.
All product finishes provided are warranted to be free from defects at time of sale only.
Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.
EVO Manufacturing products that are used for competition and or racing immediately void all warranties.
EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.
EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.
Electronic components and products provided by EVO MFG will have a 90 Day Warranty and must be deemed free if any tampering or accidental damages or abuse.
EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.
Disclaimers:
Warranties: EVO Mfg. disclaims any other warranties, whether express or implied, beyond those set out in the above-entitled “Warranties” provision. Warranties specifically disclaimed include but are not limited to any implied warranties, any warranty of suitability, any warranty of merchantability, or any warranty of fitness for a particular purpose.
Consequential Damages: EVO Mfg. will not be responsible for damages resulting in negligence, alteration, accident or use for which the part was not approved by the manufacturer or EVO. EVO will not be responsible for loss time, inconvenience, loss of use of a vehicle or any other consequential damages, or labor for removal from the vehicle and reinstallation (if any) or any part or merchandise.
Shipping:
We ship our parts anywhere in the world. Due to varying shipping rates, taxes and duties we require all orders to be placed through email (sales@evomfg.com) or phone calls (310.761.9588) to better assist you, the customer, in receiving the most accurate and cheapest shipping rates.
Please allow one business day for order processing. The majority of orders are shipped immediately if your item is in stock and available. You will receive an email notification within 2 business days, notifying you that your item(s) has shipped. If your item is currently not in stock, it will have to be made to order which may take up to 8 weeks. In such instances you will be contacted via email by Customer Service.
Terms of sale: All products shipped FOB EVO MFG and the buyer assumes all risk of damage or loss.
Insurance is available through the carrier at an additional charge. Signature required is available upon request.
Please note because we are located in Southern California all orders shipping to locations within Southern California usually arrive the next business day via Fedex or UPS Ground.
For orders shipping outside the US, please email sales@evomfg.com for shipping options.
Damaged or Missing Items:
Please verify that all contents shown on the bill of materials located on the instructions are free from damage or defects.
EVO MFG will not be held resposible for missing or damaged items caused by shipping or packaging.
EVO MFG must be notified if you have missing or damaged items within 7 days after delivery date. Contact 310.761.9588
FITMENT VERIFICATION:
All raw products should be checked for defects and for proper fitment prioir to powdercoating or painting. Incorrect items or defects must be brought to the attention of EVO MFG prior to powdercoating or painting.
EVO MFG is not responsible for cost associated with powdercoating or painting of parts that were not previously verified.
Sales Tax
For all orders shipped within California, there will be an 8.00% sales tax automatically calculated and added to your order total at time of checkout. Orders shipping to all other states will be exempt from sales tax.
Cancelling or Changing Orders
Orders can not be cancelled once you have completed the checkout process. However, we will do our best to accommodate you if you need to make any changes. Please contact Customer Service as soon as possible.