JK JKU EVO 3-5 INCH LIFT KING COILOVER CONVERSION ENFORCER PRO ( BLACK ) JEEP WRANGLER 2 DOOR & 4 DOOR 2007-2018

EVO MFG
EVO-201-1B
$5,624.70
$5,624.70

 

JEEP WRANLGER JK JKU EVO 3-5 INCH LIFT KING COILOVER ENFORCER PRO STAGE 1 (BLACK)

EVO Enforcer Pro Stage 1 (BLACK) ( JK JKU )

The EVO MFG Front and Rear LCG Bolt-On Coilover kits come complete with all necessary parts to easily convert the JK from the limited coil and shock system to a far superior performing coilover system. 12 Inches of usable wheel travel, custom built brackets for the lowest center of gravity, EVO’s legendary SPEC valving and spring rates specifically dialed in for the JK to yield excellent handling. The EVO MFG LCG Bolt-On Coilover system proves to set the bar, for ease of install, price and performance. LCG 3-5 Inch recommended lift height, fully adjustable minimal drilling/cutting required, fully bolt-on Hi Clearance design. Retains all factory rear exhaust system as well as factory front and rear swaybars.


The EVO MFG Adjustable Front Lower Control Arms are made from 2.00” x .281” wall DOM tubing, feature complete on car adjustability without removing mounting bolts. This adjustability allows for caster adjustments to be made completely while installed on car to dial in your handling and caster alignment with ease. No need to remove the control arm to make adjustments. Currie Johnny Joints are used on both ends of each arm, rebuildable, greaseable, and isolated construction for decreased transmission of road vibrations.


The EVO MFG Draglink Flip Kit raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling/ steering response of the vehicle on and off road. The EVO MFG Drag Link Flip Kit features an improved steering stabilizer mounting location to get it up and out of harm’s way above the tie rod.

KIT STAGES:


Stage 1: Includes minimum necessary upgrade suspension parts to convert your JL suspension front and rear.
Stage 2: Incorporates Stage 1 components and EVO MFG Enforcer JL Front Lower Adjustable Control Arms for caster adjustments. It's the recommended minimum kit for all currently unmodified/stock suspension JLUs.
Stage 3: Includes Stage 2 components and EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.
Stage 4: Comprises stages 1 components with the addition of all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments. This is the Ultimate Coil Short/Mid Arm Suspension System.



EVO Enforcer PRO Stage 2 ( BLACK )

Package includes:

EVO MFG Front LCG Bolt-On Coilover Kit

EVO MFG Adjustable Front Lower Control Arms

EVO MFG Adjustable Rear Upper Control Arms

EVO MFG Drag Link Flip Kit

EVO MFG Rear LCG Bolt-On Coilover Kit

 

EVO Enforcer PRO Stage 3 ( BLACK )

Package includes:

EVO MFG Front LCG Bolt-On Coilover Kit

Complete Set of EVO MFG Adjustable Control Arms

(Front and Rear Uppers and Lowers)

EVO MFG Drag Link Flip Kit

EVO MFG Rear LCG Bolt-On Coilover Kit



Notes:

High Clearance Fenders Recomended

2Door JK: Front (or exhuast spacers) and rear aftermarket driveshaft required. Rear Adjustable Upper control arms should be used in addition. Recommended purchase of EVO-201-2 (stage 2 kit) or EVO-201-3 (stage 3 kit), or EVO-1174B EVO MFG Enforcer Rear upper control arm set

4Door JKU: Front aftermarket driveshaft required or exhaust spacers, rear recommended. (not included)

Recommended wheel backspacing 3.75” or less (smaller backspacing #)

No cutting/permanent modifications of exhaust required

INSTALLATION TIME 16-26 HOURS


 

WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.



Read More
Read Less
Download PDF Instructions:

EVO-201-1.pdf

All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship.

All products must be on the original vehicle it was installed on by the original purchaser and is not transferable

Proof of purchase is required for all warranty claims

EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product

EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs

All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.

All return/warranty products must be recieved in new, unused, unmodified, undamaged condition to qualify for credit. 

Exceptions to stated warranty:

Wearable items are not included in warranty.  These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware

Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.

EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.

EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.

All product finishes provided are warranted to be free from defects at time of sale only.

Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.

EVO Manufacturing products that are used for competition and or racing immediately void all warranties.

EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.

EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.

Electronic components and products provided by EVO MFG will have a 90 Day Warranty and must be deemed free if any tampering or accidental damages or abuse.

EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.

 

Disclaimers:

Warranties: EVO Mfg. disclaims any other warranties, whether express or implied, beyond those set out in the above-entitled “Warranties” provision. Warranties specifically disclaimed include but are not limited to any implied warranties, any warranty of suitability, any warranty of merchantability, or any warranty of fitness for a particular purpose.

Consequential Damages: EVO Mfg. will not be responsible for damages resulting in negligence, alteration, accident or use for which the part was not approved by the manufacturer or EVO. EVO will not be responsible for loss time, inconvenience, loss of use of a vehicle or any other consequential damages, or labor for removal from the vehicle and reinstallation (if any) or any part or merchandise.

 

Shipping:

We ship our parts anywhere in the world.  Due to varying shipping rates, taxes and duties we require all orders to be placed through email (sales@evomfg.com) or phone calls (310.761.9588) to better assist you, the customer, in receiving the most accurate and cheapest shipping rates.  

Please allow one business day for order processing. The majority of orders are shipped immediately if your item is in stock and available. You will receive an email notification within 2 business days, notifying you that your item(s) has shipped. If your item is currently not in stock, it will have to be made to order which may take up to 8 weeks. In such instances you will be contacted via email by Customer Service. 

Terms of sale: All products shipped FOB EVO MFG and the buyer assumes all risk of damage or loss.
Insurance is available through the carrier at an additional charge. Signature required is available upon request.

Please note because we are located in Southern California all orders shipping to locations within Southern California usually arrive the next business day via Fedex or UPS Ground.

For orders shipping outside the US, please email sales@evomfg.com for shipping options.

Damaged or Missing Items:  


Please verify that all contents shown on the bill of materials located on the instructions are free from damage or defects.

EVO MFG will not be held resposible for missing or damaged items caused by shipping or packaging.

EVO MFG must be notified if you have missing or damaged items within 7 days after delivery date. Contact 310.761.9588

FITMENT VERIFICATION:

All raw products should be checked for defects and for proper fitment prioir to powdercoating or painting. Incorrect items or defects must be brought to the attention of EVO MFG prior to powdercoating or painting.

EVO MFG is not responsible for cost associated with powdercoating or painting of parts that were not previously verified.  

Sales Tax
For all orders shipped within California, there will be an 8.00% sales tax automatically calculated and added to your order total at time of checkout. Orders shipping to all other states will be exempt from sales tax.

Cancelling or Changing Orders
Orders can not be cancelled once you have completed the checkout process. However, we will do our best to accommodate you if you need to make any changes. Please contact Customer Service as soon as possible.

Your cart

×